FREE STANDARD DELIVERY to UK mainland* (exceptions apply)
The Tiger Elite Pressure Treated Pent is surely the best pent shed available online. Impregnated with Tanalith, the latest generation wood preserver, the shed is completely protected against all forms of decay and insect attack, and has a greatly extended life, guaranteed for 20 years. This fantastic building comes with a high quality joiner made door, positioned as standard to the right of fantastic joiner made mortice and tenoned windows.
This building is based on the popular pent shed but has thicker pressure treated cladding (at an incredible 16mm thick finish size) and heavy duty 58 x 44mm rounded four corner framing – none of the cheaper thinner rough cut framing you find on most competitor sheds which are much more prone to warping and splitting. Furthermore, the building is incredibly high, even higher than our standard pent sheds giving you all the headroom you need. This building is functional, long lasting, and stylish. There is heavy duty black mineral roofing felt to cover the roof and heavy duty pre-attached pressure treated floor joists to raise the building from ground.
BEWARE OF CHEAP IMITATION PRESSURE TREATED SHEDS:
Unlike many budget competitor products this building is built with only the highest quality materials and many garden buildings in the market simply cannot compare!
THIS PRESSURE TREATED PENT SHED is clad with high grade pressure treated 16mm finish shiplap tongue and groove cladding – beware of pressure treated pent sheds that feature poorly finished rough edged boards milled out of inferior timber often with a thinner finish.
THIS PRESSURE TREATED PENT SHED features double heavyweight pressure treated 58x44mm finish framework throughout giving it the strength to last – beware of buildings that use rough sawn ‘matchstick thin’ framework that barely hold the building together.
THIS PRESSURE TREATED PENT SHED features thick tongue and grooved floorboard in the floor and roof sections and contains NO cheap sheet materials such as OSB or chipboard – beware of pressure treated pent sheds that use single piece OSB / chipboard roofs that offer little protection in the areas where you need it most.
THIS PRESSURE TREATED PENT SHED retains our incredible internal height – beware of buildings that are incredibly low making it difficult to stand up inside.
It is essential that this building is assembled strictly in accordance with the instructions supplied on a firm and level base constructed from a suitably durable material. It should also be treated annually with an appropriate high quality preservative and all glazing units must be sealed, inside and out, with silicone or other water tight sealant.
For more information on how to correctly assemble and maintain your garden building please consult our comprehensive help centre.
All images and photography used is purely for illustrative purposes only – actual product colours may vary slightly due to the digital photography process and variations in individual user monitor settings.
View Technical DataFor delivery terms and conditions and further information click here
Technical Information Sizes are approximate only and refer to external dimensions excluding roof overhangs. For specific dimensions please consult our technical department. If you wish to download the technical data for this building, please visit the 'Downloads' section.
The TIGER ELITE 20 year guarantee offers protection for pressure treated (tanalised) buildings against general timber rot and decay – the guarantee does not cover the product against timber splits or warping which may occur naturally over time.
To maintain the validity of this guarantee the product must be assembled strictly in accordance with the instructions supplied, treated annually with an appropriate high quality preservative and all glazing units must be sealed, inside and out, with silicone or other watertight sealant. For more information on how to correctly assemble and maintain your garden building please consult our comprehensive help centre.
Synthetic rubber roofing membrane that will keep your building water tight and protected, and is very durable.
As an overview, it is easy to fit: order covering size and tub of special EPDM glue; then apply the paste to the roof boards and roll out the rubber roof, brushing out any air pockets; finally nail down the sides of the rubber directly onto the timbers at the side of the roof.
For a demonstration of how to fit, please see the video guide on how to fit EPDM roof covering at www.tigersheds.com/helpcentre/videos/
Yes, it is possible and a lot of our customers do this. It usually requires the assistance of a qualified electrician to assess your electrical needs and install in compliance with safety regulations.
Please check with local authority electrical codes in case a permit is required.
Alternatively you can fit a solar panel pack to your building for natural and free energy - there are many options available, see https://www.tigersheds.com/other-buildings/accessories/lights-and-alarms/
It is essential that all garden buildings are assembled on a firm and level base constructed from an appropriate and durable material.
Without the correct base, buildings may be very difficult to assemble. In many cases, an incorrect base may lead to future deterioration of the product if assembly cannot be completed correctly as a result. Problems may include doors dropping out of square and becoming difficult to open and close, and/or water leakage.
Assembling a garden building on an incorrect base is also likely to invalidate any guarantee that your product may carry.
For full details and examples of how to create an appropriate base visit our Build a Base Guide.
There should be an assembly video available to help put your building together. These cover different building types rather than individual building ranges, so while they are very helpful in showing how different building features are fitted please always use the instructions for your building model.
You can find the assembly video in the video player section on the product page, and also in the video library in the Help Centre - just click this link.
Every Tiger model has a set of helpful instructions to help assemble the building. A copy will be sent with your delivery, but there will be an electronic version on the product page in the DOWNLOADS section you can access. All the instructions can also be found in the Help Section in the Instructions library.
This is a very helpful accessory to keep your garden building door(s) open when you need easy access or additional ventilation on hot days. Hook and eye sets are simple to fit, and there are also helpful videos in the Help Centre here (or visit https://www.tigersheds.com/helpcentre/videos/).
Firstly, to find the best position, hold hook level on building suitable for good placement of eye on door. The eye location should match door framing on inside door, away from any glazing. Mark hook location on building (use spirit level if preferred). Then screw in the hook at chosen position.Then use the fixed hook to relocate the eye on the door and mark its location. Screw the eye into door frame - and the hook should fit securely into eye.
Mon-Fri 9am-5pm